50 Gallon Pneumatic Paint Mixer Machine, 1/2 HP Paint Mixer Stirring Tool, Stainless Steel Pneumatic Cement Mixers With Stand & Curved Impellers For Mixing Paints Of Mixed Air Spraying

DescriptionAre you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then it's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer.DetailsConvenient Clip: It comes with a clip that allows you to secure it to the barrel wall with a wall thickness of 24.3mm or less, so you don't need to constantly support it with your hands, which is very convenient and labor-saving. Curved Impellers: The curved impellers can drive more materials during rotation, making the mixing more uniform and effective.Silencer: The built-in silencer can keep the noise during operation at a lower level, creating a quieter working environment.ApplicationThis product is suitable for mixing, dilution, dissolution, reaction, emulsification, dispersion, turbidity, sedimentation prevention, etc. of liquid-liquid and solid-liquid. It is especially suitable for mixing the paint of mixed air spraying; It applies to the chemical industry, petrochemical industry, coating, daily chemical industry, ceramics, mining, water treatment, food beverage, medicine, paper making, electronics, textile, construction, automobile, and furniture industries. SpecificationsMaterial: Stainless Steel, 304 Stainless SteelColor: SilverStyle: ModernSurface Treatment: Baking Varnish Assembly Required: YesPower: 1/2HPStirring Capacity: 190L/50galSpeed: 50-2000RPMWorking Pressure: 1-3kg/2.2-6.6lbsGross Weight: 6kg/13.22lbsWeight: 5.35kg/11.8lbsApplicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5inProduct Length: 1.135m/3.72ftPackage Size: 114*17*14.5cm/44.88*6.7*5.7inPackage Included 1*Pneumatic MixerAll Accessories for AssemblyNotes1.The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise, a lot of moisture in the air will run into the motor, resulting in the machine being stuck.2.Please note that excessively viscous materials should not be mixed with this product, as this may cause damage to the product.3.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• 【Highly Efficient】Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth.
• 【Uniform Mixing】The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing results. Equipped with self cooling effect and directional valve, it can start, stop, and rotate at any time.
• 【Safer Pneumatic Mixer】The pneumatic motor with high starting torque can start directly under load and automatically slow down or stop according to corresponding changes. This safe, explosion-proof, and spark-free mixer gives you peace of mind.
• 【Infinite Speed Regulation】This product supports stepless speed regulation, with flexible operation, and can easily meet the different mixing speeds of various materials.
• 【High Stability】The pneumatic mixer can run at a constant speed for a long time, which is more stable than electric tools. Its good sealing performance is suitable for various harsh environments, such as flammable, explosive, high temperature, humid, etc.
• 【Large Mixing Ability】It can mix up to 50 gallons of paint, coatings, etc. at once. This large mixing capability is very suitable for use in high-demand factories, improving overall work efficiency.
• 【Easy to Maintain】The impellers are designed to be detachable, allowing you to disassemble them for cleaning, which is very convenient. It also eliminates the hassle of replacing carbon brushes, making maintenance easier.